DFK-PC 5/ 4-STF-7,62

https://www.phoenixcontact.com/gb/products/1716632 Printed-circuit board connector - DFK-PC 5/ 4-STF-7,62 - 1716632 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Plug component, Nominal current: 41 A, Rated voltage (III/2): 1000 V, Number of positions: 4, Pitch: 7.62 mm, Connection method: Screw connection with tension sleeve, Color: green, Contact surface: Tin Why buy this product  Well-known connection principle allows worldwide use  Low temperature rise, thanks to maximum contact force  Allows connection of two conductors  Flange system enables secure fixing to the housing panel by means of tool-free snap-in locking or screws  Shroud for professional EMC shield connection on the front of the device  Screwable flange for superior mechanical stability Key Commercial Data Packing unit 10 STK Minimum order quantity 10 STK GTIN GTIN 4046356137256 Weight per Piece (excluding packing) 29.600 g Custom tariff number 85366990 Country of origin Poland Technical data Dimensions Length 48.95 mm Height 26.24 mm Width 65.1 mm Pitch 7.62 mm Dimension a 22.86 mm General 12/23/2016   Page 1 / 7 https://www.phoenixcontact.com/gb/products/1716632 Printed-circuit board connector - DFK-PC 5/ 4-STF-7,62 - 1716632 Technical data General Range of articles DFK-PC 5/..-STF Type of contact Male connector Number of positions 4 Connection method Screw connection with tension sleeve Insulating material group I Rated surge voltage (III/3) 8 kV Rated surge voltage (III/2) 8 kV Rated surge voltage (II/2) 6 kV Rated voltage (III/3) 1000 V Rated voltage (III/2) 1000 V Rated voltage (II/2) 1000 V Connection in acc. with standard EN-VDE Nominal current IN 41 A Nominal cross section 6 mm² Maximum load current 41 A Insulating material PA Flammability rating according to UL 94 V0 Stripping length 10 mm Screw thread M3 Tightening torque, min 0.7 Nm Tightening torque max 0.8 Nm Connection data Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 10 mm² Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 6 mm² Conductor cross section flexible, with ferrule without plastic sleeve min. 0.25 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 6 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.25 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 4 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 10 2 conductors with same cross section, solid min. 0.2 mm² 2 conductors with same cross section, solid max. 2.5 mm² 2 conductors with same cross section, stranded min. 0.2 mm² 2 conductors with same cross section, stranded max. 4 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, min. 0.25 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, max. 1.5 mm² 12/23/2016   Page 2 / 7 https://www.phoenixcontact.com/gb/products/1716632 Printed-circuit board connector - DFK-PC 5/ 4-STF-7,62 - 1716632 Technical data Connection data 2 conductors with same cross section, stranded, TWIN ferrules with plastic sleeve, min. 0.25 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic sleeve, max. 2.5 mm² Minimum AWG according to UL/CUL 24 Maximum AWG according to UL/CUL 8 Standards and Regulations Connection in acc. with standard EN-VDE CUL Flammability rating according to UL 94 V0 Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings 64 56 48 40 32 24 16 8 0 Diagram 2 1 1 = 2-pos. 2 = 5-pos. 3 = 12-pos. 0 20 3 40 60 80 100 Current carrying capacity [A] Current carrying capacity [A] Diagram 80 70 60 50 40 30 20 10 0 2 1 = 2-pos. 2 = 5-pos. 3 = 12-pos. 0 3 20 40 Ambient temperature [°C] Derating curve for: DFK-PC 5/...-ST-7,62 with PC 5/...-ST-7,62 Conductor cross section = 6 mm² 14,1 16,8±0,1 12,4 +0,2 14,1 13,7±0,1 19,54 26,24 7,62 100 Dimensional drawing a+36,24 36,55 80 Derating curve for: DFK-PC 5/...-ST-7,62 with PC 5/...-ST-7,62 Conductor cross section = 10 mm² a+42,24 7,62 60 Ambient temperature [°C] Dimensional drawing a+36,24 1 a Sheet metal cutout for snap-on. 12/23/2016   Page 3 / 7 https://www.phoenixcontact.com/gb/products/1716632 Printed-circuit board connector - DFK-PC 5/ 4-STF-7,62 - 1716632 Dimensional drawing a+30,44 a+24,64+0,2 3,5 13,7±0,1 8,3 6,85 16,8±0,1 8,3 Sheet metal cutout for screw connection. Classifications eCl@ss eCl@ss 4.0 272607xx eCl@ss 4.1 27260701 eCl@ss 5.0 27260701 eCl@ss 5.1 27141190 eCl@ss 6.0 27260704 eCl@ss 7.0 27440402 eCl@ss 8.0 27141134 eCl@ss 9.0 27141134 ETIM ETIM 3.0 EC001121 ETIM 4.0 EC002638 ETIM 5.0 EC002638 ETIM 6.0 EC001283 UNSPSC UNSPSC 6.01 30211810 UNSPSC 7.0901 39121409 UNSPSC 11 39121409 UNSPSC 12.01 39121409 UNSPSC 13.2 39121410 Approvals Approvals Approvals UL Recognized / cUL Recognized / EAC / cULus Recognized Ex Approvals 12/23/2016   Page 4 / 7 https://www.phoenixcontact.com/gb/products/1716632 Printed-circuit board connector - DFK-PC 5/ 4-STF-7,62 - 1716632 Approvals Approval details  UL Recognized   http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm   B C mm²/AWG/kcmil 24-8 24-8 Nominal current IN 41 A 41 A Nominal voltage UN 600 V 600 V  cUL Recognized   http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm   B C mm²/AWG/kcmil 24-8 24-8 Nominal current IN 41 A 41 A Nominal voltage UN 600 V 600 V  FILE E 60425  FILE E 60425 EAC      B.01742 cULus Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm   Accessories Accessories Coding element Coding profile - CP-PC RD - 1701967 Coding profile, for plugging into the coding ribs of the plug at a later date, insulating material, color: Red     Labeled terminal marker 12/23/2016   Page 5 / 7 https://www.phoenixcontact.com/gb/products/1716632 Printed-circuit board connector - DFK-PC 5/ 4-STF-7,62 - 1716632 Accessories Marker card - SK 7,62/3,8:FORTL.ZAHLEN - 0804549 Marker card, Card, white, labeled, Horizontal: Consecutive numbers 1 - 10, 11 - 20, etc. up to 91 - 100, Mounting type: Adhesive, for terminal block width: 7.62 mm, Lettering field: 7.62 x 3.8 mm     Marker card - SK 3,8 REEL P7,62 WH CUS - 0825128 Marker card, can be ordered: By card, white, labeled according to customer specifications, Mounting type: Adhesive, for terminal block width: 7.62 mm, Lettering field: continuous x 3.8 mm     Mounting material Accessories - DFK-PC 16-SS - 1705449 Screw set for DFK-PC 16... connectors     Screwdriver tools Philips screwdriver - SZK PZ1 VDE - 1206450 Screwdriver, PZ crosshead, VDE insulated, size: PZ 1 x 80 mm, 2-component grip, with non-slip grip     Terminal marking Marker card - SK U/3,8 WH:UNBEDRUCKT - 0803906 Marker card, Sheet, white, unlabeled, can be labeled with: Plotter, Office printing systems, Mounting type: Adhesive, Lettering field: 186 x 3.8 mm     12/23/2016   Page 6 / 7 https://www.phoenixcontact.com/gb/products/1716632 Printed-circuit board connector - DFK-PC 5/ 4-STF-7,62 - 1716632 Accessories Marker strip - SK 3,8 WH:REEL - 0805218 Marker strip, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL, THERMOMARK X, THERMOMARK S1.1, THERMOMARK ROLL X1, Mounting type: Adhesive, Lettering field: continuous x 3.8 mm     Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 12/23/2016   Page 7 / 7